要先將塑料顆粒熱熔攪拌成糊狀，按規定的厚度均勻涂覆在抗拉強度好的帆布PU料上；PU革的花紋是用一種花紋紙先熱帖壓在半成品革表面，等待冷卻下來后再進行將紙革的分離，做表面處理；

將嵌件（如木、鐵、塑料等架子）固定在具有一定溫度的模具內，通過雙組份厚料混合的澆注機注料到模具內，雙組份厚料混合發生化學反應后，發泡固定成型，最終得到內有嵌件的自結皮產品；

和木或鐵架的做法一樣，只是用尼龍做的底架來做支撐受力，中間省去了木板和鐵架；

Heat melting the plastic particles and stir it to a paste , coated with it uniformly on the surface of canvas with strong tension; The pattern of the PU leather is made from fancy paper that heat sticking on the semi-finished leather and then separate the leather from the paper when it cools.

“Integral Skinning Foam” is named “Self Skinning Foam” as well, heating the mould and put the inner structure (plywood, steel or plastic) inside it, pouring the material mixed by two component ingredient into the moulding, it runs and processes in the mould when a chemical reaction is occurring by the mixed materials. A few minutes later we will see the “Integral Skinning Foam” / “Self Skinning Foam” finished or semi-finished product with inner structure. It could be used in various industry such as office furniture, auto, bathroom, fitness equipment and construction etc….

Same techniques with using plywood or steel but change nylon (PA) as inner structure.

 

工藝操作簡單，生產效率高

柔軟，具有與人體皮膚相適的肉感

產品的力學性優異于人造革

因為一體成型，耐磨性好，壽命是人造革的好幾倍

耐沖性，減震，不易使人體受傷

耐寒性，不易受氣溫的影響，適用于低溫的天氣

環保，里面不含有木板、鐵等材料

沒有氣孔，很美觀，外觀手感好，透氣性強

沾水及洗滌劑清洗，忌汽油擦洗

不能用陽光暴曬

PU possess the characteristics of operating simple, low costing, high efficiency, suitable for great batch industrial producing.

Soft enough for people sit.

Physical properties is better than artificial leather.

Service time is many times as long as artificial leather.

Good resistance to impact, proactive protection for customers.

Cold resistance to a -30 degrees Celsius temperature.

Recyclable and protect the environment since no plywood or steel inside

Good looking as no pinhole at the bottom side

Clean with water or detergent but no gas.

Avoid sun exposure